--> VapeXhale's 3 Year Anniversary Sale

VapeXNail™ Instructions


As per our policy, please inspect your glass, as any glass damage must be reported within the first 24 hours of receiving it, and if it is not, we are no longer liable for the damages.

As with all things, moderation is important, so please start small and work your way up once you are familiar with utilizing your VapeXNail™!

Step 1 - Put your essential oil/concentrate into the loading chamber, located approximately one third of the way up from the bottom. You can smear it against the inner lip if you are having a hard time removing it from your tool, or if it is more substantial, you can just drop it in by hand!

**WARNING: Do not load your oil from the top of the adapter! This will waste your essential oil as it will not be close enough to the heating element to reach proper extraction temperature.**

Step 2 - Place the adapter into your EVO just like an Herb Basket, and place your HydraTube on top of the EVO to stop any vapor from releasing into the air.

After approximately 10 seconds (this is why we recommend to start small and become familiar with the device), or when you begin to have vapor accumulate in the adapter, breathe in until your tube no longer has vapor in it, then remove the HydraTube.

Different Essential Oils may leave a residue in the chamber, so we recommend waiting 2 minutes before removing the adapter so that any residue has finished cooking off.

When removing you VapeXNail, use utmost caution, as the glass is EXTREMELY HOT. Only hold and move the adapter by the glass that does not go into the EVO itself (the glass bulb at the top of the unit and above).


Place the adapter either on a non-conductive surface like our NailBuddy™, a glass jar, or any other container that will assist in dissipating heat. We recommend waiting 3-5 minutes before using your adapter again so as to prevent accidental burning.